italian english czech german
image
www.porfitalia.com
info@porfitalia.com
 
 


Cobbles
Irregular slabs
Tiles
Kerbstones
Solid block stairs
Splitcut
Stairs
Fountains
Red master
Other stones
Ciottoli

 
You are in : Home Page > Products > Tiles
 
---Tiles
 

Tiles natural cleft

Porphyry natural cleft tiles are slabs with two natural cleft surfaces. The sides of these tiles can be split or sawn. The cut is parallel and perpendicular to the surface. The angles are right. The widths go in multiples of 2" from 4" to 1 3 5/8" for the tiles with split edges, and from 8" to 1 -3 5/8" for the sawn ones. The tolerance on the width is more or less 0 2/5" on the tiles with split edges and more or less 0 1/8" on the tiles with sawn edges. The length is random. It is also possible to have tiles with sawn edges and fixed length (max 2"). The tiles are divided into two categories depending on their thickness: from 0 " to 2 " for exterior paving without or with light traffic, and from 2" to 3 1/5" for high and heavy traffic.

Tiles machined surface

Porphyry machined surface tiles are tiles cut from blocks and can have a flamed, polished, semi-polished, honed, bush-hammered, sand textured and anticato surface. Their edges are always sawn and their thickness is uniform and usually of 0 ", 1 1/5". Their width goes from 6" to 1 8" while their length can be random or fixed.

NATURAL CLEF - SPLIT OR SAWN EDGES

WIDTH
from 4" to 1 3 5/8"
THICK
0 " / 2"
about 100 kg/sqm
1 6/10" / 2 4/5"
about 140 kg/sqm
Random or fixed length

FLAMED FINISH - SAWN EDGES

WIDTH
from 4" to 1 - 8
THICK
0 2/5"
about 50 kg/sqm
0 "
about 78 kg/sqm
1 6/10"
about 104 kg/sqm
Random or fixed length

 


Photo gallery


Click for
full view